Why callnclear? Complete VoIP Solutions

Cal4care (Thailand) Co., Ltd.

163/84 Sunphawut Rd, Bangnatai,

Bangna, Bangkok10260

Configuring the CISCO SPA5XXG IP Phone with Callnclear SIP

Configuring the CISCO SPA5XXG IP Phone with Callnclear SIP

Step 1: Start up the phone and identify its IP Address – using the menu key on the phone, go to the “Network” option and press the “Select” button. For example the IP address of the phone is

Step 2: Point your browser to the web interface of the phone:

CISCO Configuration

Step 3: Click on the “Admin Login” link, and next click on the “Advanced” link at the top of the page to the phone’s advanced administration page.

CISCO Configuration

Step 4: Step 4:Now we need to set the phone to register with Calncall SIP. Click on the “Ext1″ tab, and configure as follows:

a. Set the “Line Enable” field to “yes”

CISCO Configuration

b. In the “Proxy and Registration” section, set the “Proxy” field to the IP Address of the Calncall SIP.

Proxy: siptrunk.calncall.com

CISCO Configuration

c. In the “Subscriber Information” section enter the following information.

Display Name :

User ID : < sip username >

Auth ID : < sip username >

Password : < sip password >

CISCO Configuration

Step 5: Click the “Submit All Changes” button at the bottom of the page. Your phone will restart. After rebooting, the phone will register with Calncall SIP. You can verify this via the Status page on the phone.

CISCO Configuration

Dial Pattern :

For Singapore 65 + < Number >. Ex: 6563401006

For International Prefix: 00 + < Country Code > + < Number >.

Ex: 008034790665(Japan)




Managed Services